|
- Bridge module for the rear side of the backplane (pluggable)
- Based on the Digital Semiconductor Driver 21154
- Supports both, 3.3V and VI/O Voltage, at the same time Provides 8 clock signals for the secondary backplane
- Arbitration for 8 devices on the secondary backplane possible
- Bus width; 32/64-bit
- 8 layer multilayer
- Automatic detection 32/64-bit systems
- System configurations with one bridge 7 slot (primary) + 4-7 slot (secondary)
- System configurations with two bridges + 7 slot (primary) + 7 slot (secondary) + backplane
- Only for use in systems with system slot left
- Bus frequency: 33MHZ
- Height: 95.1 mm Width: 78.96 mm
- Printed circuit board thickness: 2.7 mm +/- 10%
Part number: 1940000203
|
|
Electrical Parameters
- Clock frequency: 33 MHz
- Bus width: 32/64 - bit
- Impedance ZD without connectors and daughter cards: 65 Ohm +/- 10%
- Possibility to use different VI/O voltage layers and secondary backplane
- Onboard voltage regulator to supply 3.3V for the bridge-driver
- JTAG interface according to IEEE1149.1
|
|
